Double Suction Structure Paper Pulp Pump Makes Paper Pulp Stable
Product instruction:
The pump is the Single-stage Single-suction centrifugal paper pulp pump whose structure is cantilever type. The pump is designed according to the foreign advanced technology. The open impeller with 3-6 vanes makes operation more economically and liquid transited smoothly. It can transport slurry and other similar materials whose consistence is lower than 6%. And the gap between front and back wear-resisting plates can be adjusted. The capacity and head are stable. Under the same conditions, the cost of our pump operation is lower.The pump is the Single-stage Single-suction centrifugal paper pulp pump whose structure is cantilever type.
Features:
1. The integrated design of middle bracket and suspension make the pump with good concentricity and strong rigidity
2. Increase the oil pool, and the temperature of bearing operation is low, so the service life is long.
3. Equipped with wear-resistant plate front and back to reduce maintenance cost
4. Variety kinds of shaft seal, and widely use of the material configuration.
5. Open impeller is suitable to the bad situation
6. It adopts intermediate shaft coupling to make disassembly simple and maintenance convenient.
Application:
Handing of cold or hot, chemically neutral or corrosive, clean liquids/products or liquid containing solid:
Chemical and petroleum industry
Oil refinery
Paper plant and Pulp industry
Sugar industry
Parameter:
Impeller diameter (D2): Φ205-Φ600mm
Capacity: 18-2500m3/h
Head: 7-57m
Speed: 750rpm, 1000rpm, 1500rpm.
Product Tags:
|
|
Non Clog Double Suction Paper Pulp Pump Cantilever Wear Resistant 750rpm / 1500rpm Speed Images
|
